ReeR – ILION

ReeR – ILION

INFORMATION

Ilion is a Type 2 safety photocell with M18 cylindrical metal body

The Ilion photocells must be connected to control unit for esample: standard AU SX or AU SXM control unit with Muting or Mosaic to form a protection system that can be composed of 1, 2, 3 or 4 single beam photocells.

In case of connection with Mosaic safety controller, the number of photocells depends to the configuration of the protection system. (For details on the interface see AU SX, AU SXM and Mosaic control units).

TECHNICAL DATA

  • Safety level Type 2 according to IEC 61496-1
    IEC 61496-2SILCL 1 according to IEC 62061
    PL c Cat. 2 according to ISO 13849-1 (with control unit AUS X or AUS XM or Mosaic)
    Minimum detectable object (mm) 12
    Max range (m) 8 – IL 10
    20 – IL 20
    Number of photocells per control unit 1 … 4 with AU SX and AU SXM control units
    In case of the Mosaic safety controller the number of photocells depends to the number available input related to the system configuration
    Response time for each photocell (ms) 7
    Output PNP – 100 mA
    signalling LED status
    Power supply (VDC) 24 ± 20%
    Electricalconnections M12 4-pole
    Max. cable length (m) 50 (between sensor and control unit)
    Operating temperature (°C) 0 … 55
    Protection rating IP 67
    Dimensions (mm) Ø 18 x 85

COMPLIANCE

  • 2006/42/EC: Machine Directive
  • 2014/30/EU: Electromagnetic Compatibility Directive
  • 2014/35/EU: Low Voltage Directive
  • IEC 61496-1 (ed.3) (Type 2) Safety of machinery – Electro sensitive protective equipment – General requirements and tests
  • IEC 61496-2 (ed.3) (Type 2) Safety of machinery – Electro-sensitive protective equipment – Particular requirements for equipmentusing active opto-electronic protective devices (AOPDs)
  • ISO 13849-1:2006 (cat. 2, PL c) Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design
  • IEC 62061 (ed.1) (SILCL1) Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems
  • EN 50178:1997 Electronic equipment for use in power installations
  • EN 55022:2110 Information Technology Equipment – Radio Disturbance Characteristics – Limits and Methods of Measurement

APPLICATIONS

    • Robotized areas
    • Assembly lines
    • Automatic warehouse
    • Handling and stocking systems

    Note: where the risk analysis allows the use of category 2 safety equipment.

79 Ratio Agency