ReeR – MICRON

ReeR – MICRON

INFORMATION

Light curtains for measurement, automation and control

Light curtains for industrial and civil applications where it is necessary to detect,measure, and recognise objects.

Depending on the number and position of the beams engaged by an object, Micron can provide real time information to a PLC or PC in order to: detect the presence or absence of objects, perform a count, detect a position, detect ashape or a profile, measure dimensions.

  • Models MI AV: equipped with two analog outputs (0/10 VDC) with programmable functions and two programmable digital outputs.
  • Models MI AC: equipped with two analog outputs (4/20 mA) with programmable functions and two programmable digital outputs.
  • Models MI B: equipped with an RS 485 serial interface with programmable functions and two programmable digital outputs.
  • Models MI C: equipped with two antivalent solid state outputs.

MicronConfigurator software for PC, with graphic user interface, is supplied with each light curtain (models A and B only). Models A and B are provided with an M5 4-pole connector for parameter configuration and monitoring ofthe light curtain.

Beams spacing available: 5, 10, 25, 30 , 50 and 75 mm.

Controlled heights: 150 mm … 3000 mm – models with beams spacing 10, 25, 30, 50, 75 mm; 150 mm … 1500 mm – models with beams spacing 5 mm.

Max. range:

  • 2,5 m – models with beams spacing 5 mm
  • 6 m – special models with beams spacing 25, 50, 75 mm for automatic warehouses
  • 10 m – models with beams spacing 10, 30 mm
  • 18 m – models with beams spacing 25, 50, 75 mm

Connections with M12 connectors. Possibility of connection of up to 3 Micron B light curtains as nodes of an RS-485 serial line for simultaneous detection of multiple dimensions and complex measurements.

YOUTUBE ENG

TECHNICAL DATA

    • Controlled heights (mm) 150 mm … 3000 mm – models with beams spacing 10, 25, 30, 50 and 75 mm
      150 mm …1500 mm – models with beams spacing 5 mm
      Beams spacing (mm) 5, 10, 25, 30, 50, 75
      Max. range 2,5 m – models with beams spscing 5 mm
      6 m – special models with beams spacing 25, 50, 75 mm for automatic warehouses
      10 m – models with beams spacing 10, 30 mm
      18 m – models with beams spacing 25, 50, 75 mm
      Measurement time (500 µs + 70 µs x n beams) x N
      Where N=scan cycles (1,2,3 selectable)
      Synchronisation between emitter and receiver Optical or via cable, selectable
      Signalling LEDs for operating status and light curtain self-diagnosis
      Power supply VDC 24 +/- 20%
      Max. length connection cables between light curtain and interface (m) 100
      Operating temperature (°C) -10 … + 55
      Protection rating IP 65 and IP 67
      Fastening mode Back slot, or to the top and lower end with SFB E180 rotatingbrackets (optional)
      Cross-section dimensions (mm) 28 x 30

COMPLIANCE

    • 2014/30/EU: Electromagnetic Compatibility Directive
    • 2014/35/EU: Low Voltage Directive
    • UL (C+US) mark for USA and Canada

APPLICATIONS

  • Measurement of the height of objects in transit on conveyor systems
  • Quality control: verification of presence, absence or position of holes
  • Two-dimensional detection of objects in transit on conveyor systems with use of 2 light curtains
  • Automatic warehouses
  • Measurement and identification of cylinders of various sizes
  • Detection of position and profile of pieces in automatic painting systems
  • Loop control
  • Quality control: verification of correct positioning of objects
  • Detection of overall dimensional limits of vehicles for vehicle handling in automatic parking garages
  • Measurement of the width and position of panels or sheets of material in transit on roller units or conveyor belts
MICRON AV
0/10 VDC analog outputs
MICRON AC
4/20 mA analog outputs
MICRON B
RS 485 serial interface with programmable functions
MICRON C
Antivalent solid state outputs
MICRON M5
Multibeams photocells

79 Ratio Agency