SMPO Models
Programmable model, allows the configuration of all Muting logics and additional functional parameters via the SCS software provided.
With Muting functions and integrated status and Muting lamp.
Two safety PNP static outputs, auto-controlled.
Programmable model (SMPO), allows the configuration of all Muting logics and further configuration of additional functional parameters (i.e. Partial Muting) viaSafegate Configuration Software (SCS).
Built-in, selectable manual/automatic Start/Restart.
M12 5-pole Muting sensor(s) connector for 2 or 4 external Muting sensors with one-way or two-way Muting logic.
Unshielded cables up to 100 meter long.
Protected height: 310 mm … 2260 mm.
| Degree of protection | IP65 and IP67 |
| Operating temperature (°C) | -30 … 55 |
| Power supply (VDC) | 24 ± 20% |
| Response time (ms) | 5,5 … 27,5 (see technical manual) |
| Muting sensors | External with ralys or PNP outut (dark-on logic) Muting arms kits (MA) Muting brackets kits (MZ) |
| Signalling | LED status display |
| Safety outputs | 2 PNP self-tested (400 mA at 24 VDC), with protection against short circuit, overload and reverse polarity |
| Built-in Muting lamp | Integrated |
| Override modes | Manual action with hold to run |
| Operating Range (m) | 4 or 12 selectable |
SAFEGATE SM
SAFEGATE SMO
Hardware configuration with integrated muting lamp
SAFEGATE SMPO
Programmable with integrated Muting lamp
MUTING ACCESSORY KITS
Arms and brackets for Muting sensors
Recent Comments